ITEL A80 A671L Remove FRP Lock With TSM Tool Pro
🤜💯⏩ Remove FRP 🔑🚀🚀
Looking for a reliable ITEL A80 A671L Remove FRP Lock With TSM Tool Pro method? You’ve found it! If your ITEL A80 (A671L) is stuck on the Google account verification screen after a reset, especially with the tough Android 14 and 2025 security patch, you need a powerful solution. This guide will show you how to use TSM Tool Pro to bypass the FRP lock in one click using the Unisoc (SPD) DIAG mode.
What is FRP Lock?
FRP (Factory Reset Protection) is a security feature on Android devices (5.1 and up) from Google. It’s designed to prevent anyone from using your phone if it’s been reset to factory settings without your permission (like after a theft). After a reset, it requires the last synced Google account credentials. While great for security, it can lock out the real owner if they forget their password or buy a used, locked device.
Common Reasons to Remove FRP Lock
You might find yourself needing to bypass the FRP lock for several reasons:
- Forgotten Credentials: You reset your phone but can’t recall the Google account password.
- Bought a Second-Hand Phone: The previous owner didn’t remove their account, leaving the device locked.
- Software Issues: A necessary factory reset was done without logging out of the Google account first.
- For Technicians: Servicing a client’s device who is locked out and is the rightful owner.
How TSM Tool Pro Removes FRP (1-Click)
TSM Tool Pro is a professional software that simplifies this entire process. For Unisoc (SPD) devices like the ITEL A80 (A671L), it uses a special diagnostic mode called SPRD U2S DIAG. This mode allows the tool to communicate directly with the phone’s hardware (the SC9863A chipset), bypassing the Android operating system. TSM Tool Pro sends a direct command to erase the FRP lock partition, making it a fast, safe, and highly reliable one-click solution.
Step-by-Step Guide: Unlock Your ITEL A80 (A671L)
Follow these instructions precisely for a successful FRP removal:
- Download & Install Software: First, download the latest version of TSM Tool Pro from their official website: tsmtoolpro.com. Also, make sure you have the correct SPD (Unisoc) USB drivers installed on your PC.
- Power Off Your Phone: Completely turn off your ITEL A80.
- Enter SPRD U2S DIAG Mode: This is the most important step.
- Press and hold both the Volume Up and Volume Down buttons simultaneously.
- While holding the buttons, connect the phone to your computer using a USB cable.
- Your computer should detect the device. You can check in Device Manager for a “SPRD U2S DIAG” port.
- Launch TSM Tool Pro: Open the TSM Tool Pro software on your computer.
- Select Model & Function: Go to the Unisoc/Spreadtrum tab. From the model list, select ITEL -> A80 (A671L). Then, click the “Remove FRP” button.
- Start the Process: The tool will begin communicating with the phone in DIAG mode and start the FRP removal.
- Wait for Completion: The process is very fast. Wait for the tool to display a “Done” or “FRP Removed Successfully” message in its log window.
- Reboot Your Device: Once completed, disconnect your phone and power it on. It will now boot up without asking for Google account verification!
Safety Tips & Precautions to Remember
- Sufficient Battery: Ensure your ITEL A80 has at least 50% battery to prevent it from dying during the process.
- Install Drivers: The process will fail if your PC can’t “see” the phone. Install the Unisoc/SPD drivers first.
- Use a Good USB Cable: A faulty cable can cause connection drops. Use the original or a high-quality data cable.
- Antivirus Check: Temporarily disable your antivirus if it interferes with the tool. Remember to turn it back on afterward.
- Official Source Only: Only download TSM Tool Pro from the official source to avoid malware.
Real Technician Success Story
Abrm Baloch, a trusted mobile technician in Gwadar, Baluchistan, frequently uses TSM Tool Pro. “A customer brought in an ITEL A80 (A671L) on Android 14, completely locked. Manual tricks were failing due to the 2025 security patch,” Abrm says. “I opened TSM Tool Pro, selected the model from the Unisoc tab, put the phone in DIAG mode, and clicked ‘Remove FRP’. It was done in under 10 seconds. It’s a reliable service that earns me $5 to $10 per device, and the tool pays for itself.”
TSM Tool Pro vs. Manual Bypass Methods
| Feature | TSM Tool Pro (DIAG Mode) | Manual “Hacks” |
|---|---|---|
| Time Required | Extremely fast (Under 1 minute) | Slow and frustrating (15-45+ minutes) |
| Success Rate | Very high, direct method | Low; often patched by security updates (like 2025-06-05). |
| Ease of Use | Simple, 1-click operation | Very complex, requires many steps. |
| Device Safety | Safe, targets only the FRP partition. | Can be risky, may require exploits. |
| Android 14 | Supports it and new patches. | Almost always fails on new patches. |
Frequently Asked Questions (FAQs)
A: It’s a special diagnostic mode for Spreadtrum (Unisoc) chipsets. By holding Volume Up + Down and plugging in the USB, you force the phone to “boot” into this low-level mode, allowing tools like TSM Tool Pro to send service commands directly to the CPU.
A: If your phone is at the FRP lock screen, it means it has *already* been factory reset. All personal data (photos, contacts, apps) is already gone. The FRP removal process just removes the Google lock; it does not erase any additional data.
A: This is the most common issue. First, check your drivers. Reinstall the SPD/Unisoc drivers. Second, try a different USB cable and port. Third, make sure you are pressing the Volume Up + Down buttons *before* and *while* you plug in the cable. The timing is important.
A: TSM Tool Pro offers both “By Model” and “By CPU” methods. The “By Model” method is convenient because it pre-selects the exact CPU (SC9863A) and any specific settings for the ITEL A80 (A671L), making it even more of a one-click solution and removing any guesswork for the technician.
A: TSM Tool Pro is a professional-grade tool and typically requires a paid license or credits to use its advanced features. This ensures continuous development and support for new devices and security updates like the one on your ITEL A80.
Extra Bonus Info: The Power of Unisoc (SPD) Unlocking
Unisoc (Spreadtrum) chipsets like the SC9863A are becoming very common in budget-friendly brands like Itel, Tecno, and even some Realme/Nokia models. Mastering the “SPRD U2S DIAG” mode is a key skill for any modern technician. TSM Tool Pro’s dedicated Unisoc tab is one of its most powerful features, allowing you to service hundreds of different models with the same simple, reliable method.
Article Conclusion
Don’t let a Google lock on your ITEL A80 (A671L) stop you. The ITEL A80 A671L Remove FRP Lock With TSM Tool Pro is a fast, simple, and reliable process. By using the direct Unisoc DIAG mode, TSM Tool Pro bypasses even the latest Android 14 security patches in seconds. Follow this guide, and you’ll have your device back up and running in no time!
Table of Contents
- ITEL A80 A671L Remove FRP Lock With TSM Tool Pro
- What is FRP Lock?
- Common Reasons to Remove FRP Lock
- How TSM Tool Pro Removes FRP (1-Click)
- Step-by-Step Guide: Unlock Your ITEL A80 (A671L)
- Safety Tips & Precautions to Remember
- Real Technician Success Story
- TSM Tool Pro vs. Manual Bypass Methods
- Frequently Asked Questions (FAQs)
- Extra Bonus Info: The Power of Unisoc (SPD) Unlocking
- Article Conclusion