Explore ArticleShow
- Understanding Anti-Crack Protection
- Preparation Checklist
- Connection Requirements
- Step-by-Step Walkthrough
- Video Guide Reference:
- Text Instructions:
- Action Summary Timeline
- FAQ Section
- Does this work on Android 11/12 devices?
- Will this trip FRP protection?
- What if the tool gets stuck at 90%?
- Is internet required during the process?
- Can this brick my device?
- Bonus: Post-Removal Optimization
- Conclusion & Next Steps
- Legal Disclaimer
Remove Anti-Crack From Transsion Devices Using TSM Tool Pro
Hey there GSM technician! 👋
If you’re struggling with anti-crack protection on Infinix, Tecno, or Itel devices, this DM-style guide will walk you through the complete removal process using TSM Tool Pro.
By the end, you’ll be able to:
- Remove anti-crack from MTK and SPD chipsets
- Understand the preparation requirements
- Follow our proven step-by-step process
- Avoid common pitfalls with our expert warnings
Understanding Anti-Crack Protection
Transsion Holdings (Infinix, Tecno, Itel) implements anti-crack protection to prevent unauthorized modifications. Here’s how it varies by brand:
| Brand | Protection Type | Chipset Compatibility |
|---|---|---|
| Infinix | Bootloader verification | MTK 6765/6768, SPD 9832E |
| Tecno | System partition encryption | MTK 6761/6765, SPD 7731E |
| Itel | Secure boot chain | MTK 6580, SPD 9832A |
Pro Tip: Always check your device’s chipset before proceeding (use *#*#3646633#*#* for MTK or *#*#83781#*#* for SPD).
Preparation Checklist
Before removing anti-crack, ensure you have:
- TSM Tool Pro v3.2.8 or higher
- Original USB cable (data transfer capable)
- Proper device drivers installed
- Battery charged to at least 30%
- Backup of important data (this process may wipe data)
Connection Requirements
| Chipset | Connection Mode | Driver |
|---|---|---|
| MTK Devices | Meta Mode (Volume Down + Power) | MTK Preloader |
| SPD Devices | Power Off Mode (Connect powered off) | Spreadtrum USB Driver |
Step-by-Step Walkthrough
Video Guide Reference:
TSM Tool Pro Anti-Crack Removal Demo
Text Instructions:
- Launch TSM Tool Pro as Administrator (Right-click → Run as Admin)
- Select your device brand from the menu (Infinix/Tecno/Itel)
- Click “Remove Anti-Crack” button in the main interface
- Prepare your device:
- For MTK: Hold Volume Down + Power to enter Meta Mode
- For SPD: Keep device completely powered off
- Connect device via USB cable (use direct motherboard port if possible)
- Wait 10-15 seconds for the tool to complete the process
- Disconnect device when you see “Operation Successful” message
- Power on device normally – anti-crack should now be removed
Processing Times:
- MTK Devices: 8-12 seconds typically
- SPD Devices: 10-15 seconds typically
- Older models (2018-2019): May take up to 20 seconds
Action Summary Timeline
| Step | Action | Time Required |
|---|---|---|
| 1 | Preparation (drivers, tools) | 5-10 minutes |
| 2 | Device connection | 1-2 minutes |
| 3 | Anti-crack removal | 10-15 seconds |
| 4 | Verification | 2-3 minutes |
FAQ Section
Does this work on Android 11/12 devices?
Yes, TSM Tool Pro supports anti-crack removal up to Android 12 on most Transsion devices. However, some 2023 models may require additional steps.
Will this trip FRP protection?
No, anti-crack removal is separate from FRP. However, we recommend removing FRP before attempting anti-crack removal for best results.
What if the tool gets stuck at 90%?
This usually indicates a driver issue. Disconnect the device, reinstall drivers, and try again using a different USB port (preferably USB 2.0).
Is internet required during the process?
No, TSM Tool Pro works offline once installed. However, initial setup requires internet for driver downloads.
Can this brick my device?
While rare, improper execution can cause bootloops. Always ensure proper preparation and follow instructions exactly.
Bonus: Post-Removal Optimization
After successful anti-crack removal:
- Flash latest firmware to prevent security patches from re-enabling protection
- Install a custom recovery (TWRP) for future modifications
- Root with Magisk for complete control (optional)
- Create a NAND backup of clean system for quick restoration
Pro Bonus: Use MTK Engineering Mode (dial *#*#3646633#*#*) to disable future OTA updates that might restore anti-crack.
Conclusion & Next Steps
You’re now equipped to remove anti-crack protection from Transsion devices like a pro! Remember:
- Always verify chipset before proceeding
- Use proper connection modes (Meta for MTK, Power Off for SPD)
- Keep TSM Tool Pro updated for new device support
For advanced techniques and premium support, consider joining our GSM Technician Masterclass.
Legal Disclaimer
This guide is for educational purposes only. The author and publisher are not responsible for any damage to devices or legal consequences from using this information. Anti-crack removal may void warranties and violate terms of service in some regions. Always comply with local laws and regulations.
TSM Tool Pro is a third-party tool not affiliated with Transsion Holdings or its brands (Infinix, Tecno, Itel). All trademarks are property of their respective owners.
One thought on “Remove Anti Crack Transsion Infinix Tecno Itel By TSM TOOL PRO”