Download TSM Tool New Update
V2026.03.17-0319
About Download TSM Tool New Update V2026.03.17-0319
Download TSM Tool New Update V2026.03.17-0319 is one of the most feature-packed releases from the TSM Tool team in 2026. Released on March 16th at 23:34, this update focuses on three major platform expansions: a Samsung Auto Detect one-click system, full TCL Mediatek Preloader Auth support for 35+ models, and an LG Auto Detect system — all under a unified interface.
Beyond new brand support, this update ships Qualcomm protocol improvements and resolves a known crash bug on Redmagic 11 Pro. Whether you run a GSM workshop, a mobile repair shop, or handle bulk device servicing, this version delivers the tools you need in a single click.
TSM Tool has earned its reputation by eliminating the need for multiple platforms. V2026.03.17-0319 extends that philosophy — now covering Samsung, TCL, LG, Qualcomm, and MediaTek devices from one consistent, stable GUI.
Device Overview — Newly Supported Highlights
Below are the primary device groups added in this update. Each capsule shows the brand, model name, and model identifier where available.
Detailed Supported Models Table
All models added in V2026.03.17-0319, grouped by brand with their model codes and supported operations.
| Model Name | Model Code | Remove FRP | Factory Reset | R/W Firmware | HW Keys | Bootloader | Status |
|---|---|---|---|---|---|---|---|
| ▸ SAMSUNG — Auto Detect System | |||||||
| Galaxy A01 | SM-A015A bitA | ✓ | ✓ | ✓ | — | — | NEW 2026 |
| Galaxy A05s | SM-A057F bitC | ✓ | ✓ | ✓ | — | — | NEW 2026 |
| Galaxy Tab A9 | SM-X115 bit9 | ✓ | ✓ | ✓ | — | — | NEW 2026 |
| Galaxy F07 | SM-E075F bit3 | ✓ | ✓ | ✓ | — | — | NEW 2026 |
| ▸ TCL — Mediatek Preloader Auth | |||||||
| TCL TAB 10 HD 4G | 9160G | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL TAB 10 (variant) | 9160G1 | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL TAB 10V | 9161G | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL NXTPAPER 11 | 9166G | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL TAB 10 WiFi | 9460G1 | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL TAB 10V | 9461G | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL TAB 11 Gen 2 | 9465G | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL NXTPAPER 11 Gen 2 | 9465X | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL TAB 11 | 9466X | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL NXTPAPER 14 | 9491G | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL TAB 10 (RU) | 9494G | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL A1 | A501DL | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL LX | A502DL | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL A1X | A503DL | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL A2 | A507DL | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL A2X | A508DL | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL A3 | A509DL | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL FLIP 2 | T408DL | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL K24 / 50 LE | T434D | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL K23 / K24 | T434W | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL ION V | T510D | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL ION V (variant) | T510WS | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL 30 T | T603DL | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL 30 LE | T605DL | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL 40 NXTPAPER | T612 | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL 20 XE | T676 | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL 30 XL | T701DL | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL 50 XL | T702D | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL 30 SE | T766 | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL 40 R 5G | T771 | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL 40 R 5G (variant) | T771K3 | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL 30+ | T776 | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL 50 Pro NXTPAPER 5G | T803D | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| TCL 50 Pro NXTPAPER 5G | T803E | ✓ | ✓ | ✓ | ✓ | ✓ | Supported |
| ▸ LG — Auto Detect System | |||||||
| LG Velvet | G900 | ✓ | ✓ | ✓ | — | — | Auto Detect |
| LG V60 ThinQ | LM-V600VM | ✓ | ✓ | ✓ | — | — | Auto Detect |
| ▸ QUALCOMM / REDMAGIC — Protocol & Fixes | |||||||
| Qualcomm Devices (Many) | QC Protocol | ✓ | ✓ | ✓ | — | — | Updated |
| Redmagic 11 Pro | Bug Fix | ✓ | ✓ | ✓ | — | — | Fixed |
What is FRP (Factory Reset Protection)?
FRP — Factory Reset Protection — is a security mechanism Google introduced with Android 5.1. When enabled, the device requires the previously linked Google account credentials to be entered after a hard reset. This stops unauthorized users from accessing a device that has been wiped.
How FRP Works
During setup, your device registers its Google Account with the bootloader. If a factory reset is performed without first removing this account, Android will demand re-authentication on next boot. Without the correct credentials, the device is effectively locked.
Why Technicians Need FRP Removal Tools
- Customers forget their Google account password or lost access to the email linked during setup.
- Second-hand devices still have the previous owner’s account tied to the bootloader.
- Business phones managed under Google Workspace that have been decommissioned and need re-provisioning.
- Warranty repairs often require a clean factory state that bypasses the FRP screen entirely.
TSM Tool automates this process using deep firmware-level access — no manual credential entry needed.
Common FRP Lock Triggers — What Causes It
Understanding what triggers FRP lock helps technicians diagnose faster and explain the issue clearly to customers.
- Hard Reset Without Account Removal: Customer resets the phone from recovery or Settings without logging out of Google first.
- Software Flash Gone Wrong: A bad flash wipes user data partitions while the bootloader still holds the old Google token.
- Forgotten Google Password: The most common case — account exists but the password has been changed or forgotten.
- Stolen Device Recovery: FRP kicks in as an anti-theft measure when a device is wiped remotely via Find My Device.
- Second-Hand Purchase: Previous owner did not remove their account before selling or exchanging the device.
- Enterprise MDM Wipe: A device enrolled in MDM/EMM that gets wiped triggers FRP through the corporate Google account.
- OTA Update Failure: Rare but documented — a failed OTA can corrupt the account token state, causing FRP on next boot.
Key Features of TSM Tool V2026.03.17-0319
Here is what this update actually brings to your workshop — described practically, not as marketing copy.
Samsung Auto Detect
Connect any supported Samsung device and TSM detects model, security patch, and bit level automatically. No manual selection required.
TCL MTK Preloader
Full MediaTek Preloader Auth for 35+ TCL devices including tablets and NXTPAPER series. Includes HW Key read and bootloader unlock.
LG Auto Detect
One-click LG system covering Velvet G900, V60 ThinQ, and more. Auto detects connection mode without needing user input.
Qualcomm Protocol
Updated Qualcomm protocol layers applied across many device brands. Improves connection stability and operation success rates.
Redmagic 11 Pro Fix
Critical bug causing operation failure on Redmagic 11 Pro has been patched. Operations now complete without error.
HW Key Extraction
Read hardware encryption keys from TCL MTK devices — essential for advanced repair workflows and firmware re-signing.
R/W Firmware
Read and write full firmware dumps across Samsung, TCL, and LG devices in a single session without switching tools.
Bootloader Control
Unlock and re-lock bootloaders on TCL MTK devices — critical for custom ROM deployment and device repurposing.
How to Use TSM Tool V2026.03.17-0319 — Step by Step
Follow these steps carefully. Skipping any step can result in incomplete operations or device issues.
- 1Download & Install the Update
Get the latest version from the official download link below. Run the installer as Administrator on Windows. Overwrite any existing TSM Tool installation. - 2Install USB Drivers
Install ADB, Samsung, MTK, and LG USB drivers before connecting any device. Unrecognized drivers are the #1 cause of failed operations. - 3Launch TSM Tool & Log In
Open TSM Tool with your registered credentials. Verify your credit balance before starting — each operation uses credits. - 4Select the Correct Brand Tab
Navigate to Samsung, TCL, or LG section depending on your device. For Samsung, use the “Auto Detect” button added in this version. - 5Put Device into the Required Mode
For Samsung: Download Mode. For TCL MTK: Preloader/BROM. For LG: Download Mode or 9008. See Section 13 for mode entry guides. - 6Connect Device via USB
Use a high-quality USB-A to USB-C or Micro-USB cable. Avoid hubs. Connect directly to a rear USB port on your PC for best results. - 7Auto Detect & Confirm Model
Click “Auto Detect”. TSM Tool reads the device info and pre-fills the model, bit level, and available operations. Confirm before proceeding. - 8Select Operation & Execute
Choose Remove FRP, Factory Reset, or Read/Write Firmware. Click Execute. Do not disconnect the device until the success log appears. - 9Reboot & Verify
Once complete, reboot the device. Confirm FRP is removed by attempting setup without a Google account. Verify firmware by booting normally.
Safety & Backup Tips Before You Start
Hardware-level tools interact directly with firmware partitions. A few precautions prevent irreversible damage.
Before Any Operation
- Always charge the device to at least 60% before starting a firmware read or write. Low battery during a write operation can brick the device permanently.
- Back up all user data. FRP removal and factory reset operations wipe internal storage. This data cannot be recovered afterward.
- Verify the exact model number on the physical device label or under Settings → About Phone. Writing firmware built for a different model code will cause a hard brick.
- Use the original cable when possible. Third-party cables with poor data lines cause intermittent disconnects mid-operation.
- Disable Windows Defender Real-Time Protection temporarily — it sometimes blocks TSM Tool from accessing USB device drivers correctly.
During the Operation
- Never touch the USB cable, device, or PC while a write operation is in progress.
- Keep the screen on if the device supports it during flashing — some models enter sleep and disconnect mid-operation.
- Do not run other heavy applications simultaneously. Reserve system resources for TSM Tool during critical operations.
Credit Score Information
TSM Tool operates on a credit-based system. Each operation consumes a fixed number of credits. Below is a general reference — always verify current rates in the TSM Tool dashboard or official website as they may change with updates.
Note: Credit counts shown above are general estimates. Check the TSM Tool GUI or the official website for exact pricing per model and operation type. Some operations on newer or more complex models may carry a higher credit cost.
From the Workshop — A Real-World Success Story
Practical feedback from GSM shop owners helps other technicians understand how these updates perform in real conditions.
I had three TCL tablets sitting on the shelf for two weeks — customers had forgotten their Google accounts and no tool we had could handle them cleanly. The moment I updated to V2026.03.17-0319 and saw TCL MTK Preloader Auth in the list, I ran Auto Detect on each one. All three completed FRP removal in under four minutes total. The HW Key read feature is a bonus I didn’t even know I needed until I used it on a logic board swap job. This update saved three jobs and returned three happy customers in one afternoon.
The LG Auto Detect is what I appreciate most. Previously, LG jobs took 15 minutes of mode juggling and manual model confirmation. Now it’s two clicks. The Qualcomm protocol fix also cleaned up some intermittent failures we were seeing on Snapdragon-based devices. V2026.03.17-0319 is our daily driver now.
Comparison — TSM Tool vs Alternatives
Here is how TSM Tool V2026.03.17-0319 stacks up in terms of feature coverage for the newly added brands and models.
| Feature | TSM Tool V2026 | Generic Box Tool | Manual Method |
|---|---|---|---|
| Samsung Auto Detect (One Click) | ✔ | ✘ | ✘ |
| TCL MTK Preloader Auth (35+ Models) | ✔ | ✘ | ✘ |
| LG Auto Detect System | ✔ | ✘ | Partial |
| Qualcomm Protocol Updated | ✔ | Varies | ✘ |
| Read HW Keys (TCL) | ✔ | ✘ | ✘ |
| Bootloader Unlock/Relock | ✔ | Varies | ✘ |
| Read & Write Full Firmware | ✔ | Varies | Manual/Risky |
| Redmagic 11 Pro Support | ✔ | ✘ | ✘ |
| Regular Model Updates | ✔ | Rare | N/A |
| Single GUI for All Brands | ✔ | ✘ | ✘ |
Frequently Asked Questions
The Auto Detect system works across a wide range of Samsung devices. However, the new 2026 patches specifically add Galaxy A01 (SM-A015A bitA), A05s (SM-A057F bitC), Tab A9 (SM-X115 bit9), and F07 (SM-E075F bit3). For other Samsung models, check the TSM GUI or website for the full supported list. Not every model at every security patch level is guaranteed to work.
Yes. This update adds full TCL MediaTek Preloader Auth, which includes FRP removal, factory reset, firmware read/write, HW Key reading, and bootloader unlock/relock for 35 TCL models covering tablets, NXTPAPER devices, and smartphones. Connect the device in BROM/Preloader mode and run Auto Detect.
Credit costs vary by operation type and device model. Generally, basic operations like FRP removal and factory reset cost fewer credits than firmware flashing or HW Key extraction. Always verify the current credit cost shown in the TSM Tool GUI before proceeding — rates can change with server-side updates.
TSM Tool runs on Windows 7, 8, 10, and 11 (32-bit and 64-bit). Windows 10/11 64-bit is recommended for the best driver compatibility and stability. Always run as Administrator and disable any antivirus software temporarily that might block USB driver communication.
Yes. V2026.03.17-0319 includes a specific patch for the Redmagic 11 Pro bug that was causing operation failures in previous versions. After updating, Redmagic 11 Pro operations should complete without errors. If you still experience issues, ensure your USB drivers are up to date and try a different USB port.
Auto Detect connects to the device at the firmware level and reads the model number, chipset, current security patch level, and bit level directly from device partitions. It then pre-selects the correct operation profile automatically — eliminating the manual selection step that previously caused errors when technicians selected the wrong model variant.
The update notes specifically mention LG Velvet G900 and V60 ThinQ LM-V600VM as confirmed additions, plus notes that many other LG devices are covered. The exact full list is available inside the TSM Tool GUI. Run Auto Detect with your LG device connected — if it’s supported, the tool will identify it and present the available operations.
EDL / BROM / Download Mode Entry Guide
Getting a device into the correct hardware mode is essential before connecting it to TSM Tool. Here are the standard procedures per platform.
Samsung — Download Mode
- Power off the device completely.
- Hold
Vol Down + Vol Upsimultaneously. - Connect USB cable while holding buttons.
- Release when Download Mode warning appears.
- Press Vol Up to confirm and enter mode.
TCL MTK — BROM / Preloader
- Power off device completely.
- Hold
Vol Downand connect USB. - Device enters BROM/Preloader silently (no display indicator).
- TSM Tool will detect the connection automatically.
- If no detect: remove battery briefly (if removable), retry.
LG — Download Mode
- Power off the device.
- Hold
Vol Down + Powertogether. - Release Power when LG logo appears, keep Vol Down held.
- Device boots into Download Mode.
- Connect USB and run Auto Detect in TSM Tool.
Qualcomm — EDL Mode (9008)
- Power off device completely.
- Hold
Vol Down + Vol Upand connect USB. - PC will show a new COM port (Qualcomm 9008).
- Alternative: use test points on board for older devices.
- Select EDL operation in TSM Tool and proceed.
General Tips
- Always use rear USB ports — front ports have less stable power delivery.
- Disable USB Selective Suspend in Windows Power settings.
- Install all brand-specific drivers before first use.
- If device not detected, try a different USB cable first.
- Run TSM Tool as Administrator at all times.
Ready to Download TSM Tool V2026.03.17-0319?
Samsung Auto Detect · TCL MTK Preloader Auth · LG Auto Detect · Qualcomm Protocol Updates · Redmagic 11 Pro Fix
Download Now — V2026.03.17-0319
Official release: 2026/03/16 23:34:35 · tsmtoolpro.com
Technical Disclaimer
Authorized Use Only: TSM Tool is a professional hardware servicing tool intended exclusively for licensed mobile repair technicians, authorized service centers, and trained GSM professionals. Use of this tool to access, modify, or unlock devices that you do not own, have no authorization to service, or that are reported stolen is strictly prohibited and may constitute a criminal offense under applicable laws in your jurisdiction.
Data Loss Warning: Factory reset and FRP removal operations permanently erase all user data stored on the device. Always inform the device owner and obtain explicit consent before performing these operations. tsmtoolpro.com accepts no liability for data loss resulting from tool usage.
Device Risk: Incorrect firmware flashing, power interruption during write operations, or using firmware built for a different model can result in permanent device damage (hard brick). The user assumes full responsibility for all operations performed using TSM Tool.
No Warranty: TSM Tool and its updates are provided “as is.” While the development team maintains rigorous testing standards, compatibility with every device variant at every security patch level cannot be guaranteed. Always verify support in the GUI before performing paid-credit operations.
Legal Compliance: It is your responsibility to ensure that all repair and unlocking activities comply with local telecommunications regulations, device manufacturer terms of service, and applicable consumer protection laws.
Table of Contents
- Download TSM Tool New UpdateV2026.03.17-0319
- About Download TSM Tool New Update V2026.03.17-0319
- Device Overview — Newly Supported Highlights
- Detailed Supported Models Table
- What is FRP (Factory Reset Protection)?
- How FRP Works
- Why Technicians Need FRP Removal Tools
- Common FRP Lock Triggers — What Causes It
- Key Features of TSM Tool V2026.03.17-0319
- Samsung Auto Detect
- TCL MTK Preloader
- LG Auto Detect
- Qualcomm Protocol
- Redmagic 11 Pro Fix
- HW Key Extraction
- R/W Firmware
- Bootloader Control
- How to Use TSM Tool V2026.03.17-0319 — Step by Step
- Safety & Backup Tips Before You Start
- Before Any Operation
- During the Operation
- Credit Score Information
- From the Workshop — A Real-World Success Story
- Comparison — TSM Tool vs Alternatives
- Frequently Asked Questions
- EDL / BROM / Download Mode Entry Guide
- Samsung — Download Mode
- TCL MTK — BROM / Preloader
- LG — Download Mode
- Qualcomm — EDL Mode (9008)
- General Tips
- Ready to Download TSM Tool V2026.03.17-0319?
- Technical Disclaimer